Helsi Ice Plunge Tie-Down Fasteners

• x 2 Straps with x 4 Buckles (with security combination lock)
  
• x 8 Hex Screws

Installation Tips:

1. Position the Tie-Down Fasteners over the lid, running across the handles and hanging approximately 30 cm down each side of the Ice Plunge.
   
2. Mark the position of the 2 screw eyelets with a pencil to denote where the straps will be secured into the wood. Note: The length of the strap is fixed and cannot be adjusted.
   
3. Once one side of the strap is secured with the buckle inserted, tension the strap to find the correct placement of the buckle on the opposing side. 
   
4. Attach each buckle using the provided hex head screws. A hex bit is required for installation.
   
5. Clip the buckle shut until you hear or feel a click, confirming it’s properly locked.
   
6. Repeat these above steps for both straps.

For added security, you can set a custom combination code to lock the buckles. Always check that the fasteners are secured before leaving the unit unattended.

To set your custom code:

1. Make sure the current code is 000.
   
2. Press and hold the unlock buckle.
   
3. While holding it, turn the dials to your desired code.
   
4. Release the unlock buckle – your new code is now set.